Gearmotors: How are gearmotors installed?


2020-10-15

Gearmotors occupy quite an important place in our production process, especially in the machinery industry, gearmotors, gearmotors are more widely used. Many consumers buy, but do not know how to install, then let me come to give you a detailed introduction, about this equipment, its most basic installation methods introduction.

sm1dfLv7TGCRqKfl6IaBkA.jpg

1. Firstly, couplings, pulleys and other connecting parts must be installed on the output shaft when the gearbox is mounted. When installing these connecting parts, no hammering is allowed. After all, the gearmotor output shaft structure will not withstand axial hammering. We can screw some screws into the holes at the end of the shaft to compress it. In this way, the device will be able to withstand the axial impact force.
2, the selection of the diameter of the output shaft and input shaft should be matched to a certain extent, do not choose blindly. In addition, when installing the gearbox, pay attention to the eyebolt on the gearbox. It is only used to lift the gearbox, and other types of gearheads cannot be installed arbitrarily, because different types of gearmotors have different properties and requirements. Therefore, it is necessary to pay attention to these points in the installation process as well.
3. When installing the gearbox, check the height of the gearmotor mounting centerline and the corresponding dimensions of the parts to be coupled. The concentricity of the mounting shaft after calibration must not exceed the permissible range of the coupling. When calibrating, steel or cast iron shims must be used to increase the height. The design of the buffer shims should also not cause deformation of the housing, as sometimes the pressure on the buffer shims can be relatively high, which can cause deformation of the housing after exposure to high pressure. They may be arranged symmetrically on both sides of the foundation bolts, and their mutual spacing may also allow free flow of water during irrigation.
Above is how to install the gear reducer. Shandong Anjifu Transmission Equipment Co., Ltd. is a professional gearmotor manufacturer, if you have any requirements, please feel free to consult.

Other news

2024-02-02

Russian businessmen visit the company

On January 31, 2024, Dmitriy KIYAPYANOV, Director of Transmission Department of MARINE SOLUEIONS, Russia, and his team visited our company.

2023-11-02

We invite the management of Shandong Century Sunshine Paper Group to visit our company!

We invite the management of Shandong Century Sunshine Paper Group to visit our company!

2023-08-14

Specialists of Oerlikon Textile Technology (Beijing) Co.,Ltd.

On August 12, 2023, Oerlikon's German electrical engineering specialists Sauer, the head of electrical engineering department of Oerlikon Texeile Technology (Beijing) Co., Ltd. Mr. Jin Zhenyuan, Mr. Li Quansheng, head of spare parts department, Mr. Meng Haiying and his staff visited our company.

2023-07-10

Gearmotor manufacturers: technical advantages of hardened gearboxes

Gearboxes are an integral part of many mechanical systems and hardened gearboxes, as one of the common types of gearboxes, play an important role in industry. In this article, we will discuss the technical advantages of hardened gearheads and why we choose them.

2023-06-30

Why choose a hardened gear reducer?

Have you ever encountered a situation where you need to convert a high-speed rotational force into a low-speed but high-torque rotational force? In such a situation, a hardened gear head is undoubtedly the ideal choice.